Assembling a Lindr Tube dispense tower
Great you bought a Lindr Tube dispense tower with us. To make the assembling process easy for you we made a short instruction video that helps you with assembling your Lindr tube dispense tower.
Assembling a Lindr Tube dispense tower is quiet easy. First of all you disassemble the chrome ring which is assembled over the screwing at the bottom of the Lindr Tube dispense tower. This chrome ring goes over the screwing from the tap. So unpack the tap and place the chrome ring over the screwing of the tap, now you screw the outerthread from the tap into the Lindr Tube dispense tower at the top. It doesn't matter if the tap stands to a side if you tighten the screwing. After the tap is assembled you disassemble the tap from the screwing with the chrome nut. Place the tap in the right direction an tighten the chrome nut to the tap. With finishing these simple steps the Lindr Tube dispense tower is ready to be assembled to your bar.
Now it's time to drill a whole in the bar top at the place where you want your Lindr Tube dispense tower. The whole needs to be 22mm. When you drilled the whole you can easily assemble the Lindr Tube dispense tower to the bar top and fix the Tube dispense tower with the PVD plated nut under the bar top. When this step is also ready you can connect a beverage tube to the stainless steel tube that comes out the Tube dispense tower. You can connect your beverage tube by making use of a John Guest fitting, you can also use a tube with a hose clamp.
Now you are ready to use your Lindr Tube dispense tower. The Lindr Tube dispense tower is very popular for several kind of beverages like for example beer, but the Lindr Tube dispense tower is also heavily used for pouring cold water.
Below you can see the assembling steps also in a short instruction video.
We hope you enjoy your Lindr Tube dispense tower.
Instruction video about how to install a Lindr Tube dispense tower.
If you have any further questions about assembling your Lindr Tube dispense tower after watching this instruction video? Don't hesitate to contact us